Tektronix FG502 Function Generator Plugin Module 11 MHz - Tested. FREE SHIPPING

Description

Tektronix FG502 Function Generator Plugin Module 11 MHz working unit retired from the Tektronix Video Division.
The Tektronix FG502 is a function generator plug-in for the
TM500 system
. It generates low distortion sine, square, triangle, positive and negative pulse, and ramp waveforms from 0.1 Hz to 11 MHz.
A squarewave trigger is available at the front panel. Variable DC offset is also provided.
Α voltage-controlled frequency (VCF) input controls the output frequency from an external voltage source. The output frequency can be swept above or below the selected frequency to maximum of 1000:1 depending on the polarity and amplitude of the VCF input and the selected output frequency.
An external gate input allows the generator to operate for the duration of an externally applied gating signal. This mode provides either a single cycle output, or a train of preselected waveforms, depending on the gating signal width and the generator frequency setting.
Specifications
Frequency0.1 Hz to 11 MHz, resolution 10-4Frequency stability≤0.1% for 1 hour, ≤0.5% for 24 hours (ambient +25 °C ±5 °C)Frequency accuracy<3% of full scale from 0.1 Hz to 1 MHz. <5% of full scale from 1 MHz to 10 MHzOutput Amplitude>10 Vp-p open circuit. >5 Vp-p into 50 Ω (@ 10 kHz)Output Offset>±5 Vp-p open circuit. >±2.5 Vp-p into 50 ΩAmplitude flatnessSine, ±1.5 dB ref. to 10 kHz; Square, triangle ±3 dB referenced to sineSine Distortion< 0.5% from 10 Hz to 50 kHz. Harmonics >30 dB down at all other frequenciesTriangle Symmetry and LinearityWithin 1% from 0.1 Hz to 1.1 MHz, 3% from 1.1 MHz to 11 MHzRisetime (Square/Pulse)<20 nsVCF10 V signal shifts frequency >1000:1Ext. Gate0 to >+2 V, not to exceed +15 VTrigger Output>5 V open circuit, >2.5 V into 50 ΩFunctions
Sine
Square
Triangle
+Ramp, −Ramp
+Pulse, −Pulse
Rear Interface
Output: A28 (GND A27)
Trigger Output: B27 (GND B28)
Gate In: B24 (GND B25)
VCF In: B21 (GND B22)