Ramsey RSG-1000B RF Generator signal source 1100 MHz

Description

This is a tested, working, like new condition and guaranteed RF generator from Ramsey. This is the highest quality RF generator offered by the company, and is
laboratory grade.
Standard features include a 1 ppm time base, 90 set-up memories, and an RS-232 interface that supports polled readings plus download and upload of all setup memories. At 12"x6" x 12" and 11 lbs, it is suitable for mobile use as a service tool or local oscillator.
Accurate and Stable
Frequency synthesis is referenced to an internal 0.1 ppm 50 MHz time base. Input for an external time base is standard.
Easy to use
The display is a bright green VFD you can read from across the room, and displays all operating parameters. A numeric membrane keypad enables direct entry of all parameters. All functions are accessible without using a "shift" or second function key for real ease of use. We have also incorporated a "smart knob" which has analog feel, but is intelligently enabled when entering or changing parameters in any field
Ramsey RSG1000B
RF Signal Generator Specifications
SPECIFICATIONS (At <= 0dbm output level)
Frequency Range:
100 KHz to 1100.00000 MHz
Resolution:
10 Hz continuous tuning, 100 Hz above 1000 MHz
Oscillator Frequency:
50 MHz TCXO
Oscillator Stability:
±0.1 ppm from 15° C to 35° C.
Spectral Purity
Harmonics:
Non-Harmonics:
-30 dbc, 500 KHz - 1100 MHz
-50 dBc typical
Residual FM:
5 Hz typical, 0.3 to 3 KHz detection BW
Residual AM:
-60dBc (>10 KHz from carrier) 0.3 to 3 KHz detection BW
Output Level:
-130 to +10 dBm (50 Ohms); Resolution: 0.1 dB
Level Accuracy:
±1 dB (>500 KHz)
Level Units:
dBm, dBmV, mV, dBµV, µV
Reverse Power Protect:
25 watts, 50 VDC
Leakage:
1 µV (2 turn loop, 1 inch diameter, 1 inch distance)
Frequency Modulation
Range:
Accuracy:
Freq. Response:
Max. Deviation:
Range:
0 - 99.9 KHz in 0.1 KHz steps
±5% of scale
50 Hz to 25 KHz
99.9 KHz; except 250 to 500 MHz
50 KHz
Amplitude Modulation
Depth:
Distortion:
Accuracy:
Frequency response:
0 - 75% in 1% steps
less than 5%
±5%
50 Hz to 15 KHz
Modulation Sources
Internal 1 KHz derived from reference.
External 600 ohm impedance
Level LEDs to indicate correct 1 Volt p-p input level
Front Panel:
Sealed membrane with audio acknowledgment
Display:
Two line, green vacuum fluorescent display
RS-232:
RS-232 interface provides polled readout plus downloading and uploading of all front panel setups
Memory:
90 full front panel set-ups. 9 series of 10 memories each. 10 year retention
External Timebase Input:
10 MHz, 1 Volt p-p
Power Requirements:
90 to 230 VAC ±10%, 50/60 Hz
Dimensions:
12" x 6" x 12" (W x H x D)
Weight:
11 lbs