Gigatronics 1026 Signal Generator 50 MHz to 26.5 GHz Tested and Working

Description

Gigatronics 1026 Signal Generator 50 MHz to 26.5 GHz
Tested and Working
New Capacitors Installed
The Gigatronics 1026 Signal Generator/Counter provides several microwave generation and measurement functions which result in making the instrument a versatile microwave test set that can replace a number of instruments in many applications.
The unit is a 50 MHz to 26.5 GHz digital synthesized signal generator that provides precise, highly stable and calibrated signal output.
The synthesized output has versatile pulse modulation, amplitude modulation and digital sweep with selectable limits in precise increments of 1MHz, 10MHz or 100MHz.
A sweep output is provided to drive XY plotters, oscilloscopes or other external indicating devices.
Gigatronics 1026 Features:
Frequency Range: 50 MHz to 26.5 GHz
Internal Step Attenuator
IEEE488 GPIB
Low Spurious and Phase Noise
±1 dB Leveling
High Resolution
AM, FM, Pulse and Scan Modulation
Synthesized Accuracy
Digital Frequency Sweep
Gigatronics 1026 Specifications:
Frequency Characteristics
Range: 2 to 26 GHz
Resolution: 1 MHz
Accuracy: Same as Time Base
Time Base (External): 10 MHz ±1x10-9 or better; 0.5 to 5 Vp-p overrides internal time base
Time Base Output: Buffered 10 MHz, 1 V RMS into 50 ohms, drived from internal or external time base
Spectral Purity
Harmonics, Subharmonics: <-55 dBc
Spurious (Nonharmonics): <-55 dBc
RF Output Characteristics
Max Leveled Output: ≥+5 dBm
Output Level Accuracy: ±1 dB to 18 GHz; ±2 dB from 18 to 26 GHz
Attenuation: 99 dB in 1dB steps
Level Adjustment: -5 dB to +15 dB
Venier Level Adjustment Range: 20 dBm
Source Impedance: 50 ohms, nominal
Output VSWR: ≤ 2:1
Sweep Operation
Method: Digitally controlled continuous or step and lock
Mode: Automatic recycle, single sweep or single step
Increments: Selectable 1, 10 or 100 MHz
Sweep Time: 10 rates in 1-2-5 sequence, approx. 1 msec/step to 1 sec/step (unlocked sweep)
Sweep Trigger Input: TTL low to initiate single sweep or single step
Pulse/Square Wave Modulation
Repetition Rate: 1 kHz Fixed or Variable (ranges 100 Hz to 5 kHz and 1 kHz to 50 kHz)
Pulse Width: 1 μsec Fixed or Variable (0.1 to 10 μsec)
On/Off Ratio: >30dB
Rise/Fall Times: <25 nsec
Overshoot, Undershoot and Ringing: ±2 dB, max
Settling Time: ≤ 100 nsec
Sync Output: TTL level modulation waveform
External: TTL level signal, 10 Hz to 1 MHz, 0.1 μsec min width, rising or falling edge triggering
General Specifications
Remote Interface: IEEE STD 488-1978 - All front panel controls and readouts except variable modulation rate and width
Operating Temperature Range: 0 to 50º C
Warm-up Time (to meet all specifications): 20 minutes, max
Data Sheet:
This link removed due to eBay's policy on links
Payment:
PayPal accepted.
Contact should be made within 3 days and payment must be received within 10 days of winning. Payment must clear before shipping.
Shipping On This Item:
Shipping & Handling can be calculated using the shipping calculator.
USA shipping with UPS (No PO Boxes). Shipping to Canada with UPS. See calculator for available options.
Due to the current crisis we are experiencing extended handling times, Please be Patient.
Shipping address must match "bill to" address.
Combined shipping is allowed.
Return Policy:
This item may be returned within 14 days from the date you receive your order for refund of auction sale price.
Shipping & Handling fees are non-refundable.
Feedback Policy:
When the customer is satisfied with a purchase and leaves positive feedback then we are more than happy to leave feedback in kind.
Please contact us
FIRST
if there is a problem or concern.