AE20125 10 MHz Sweep DDS Function Generator Kit with USB and Modulation

Description

ASCEL ELECTRONIC
Revision 3: Improved Performance!
Many improvements: multilayer PCB, firmware updates over USB, increased signal quality...
AE20125 10MHz Sweep DDS Function Generator Kit with Modulation and USB
DESCRIPTION:
The AE20125 is a kit for a 10 MHz DDS Function Generator with Sweep, Frequency- and Phase Modulation and USB
Sine
(0.1 Hz to 10 MHz),
Triangle
and
Square wave
(0.1 Hz to 2.5 MHz)
Frequency Resolution:
0.1 Hz
over the whole range
Output Amplitude:
0 - 5Vpp, 50 Ohm impedance
DC Offset:
10V (-5V to +5V)
Sweep:
start, stop and sweep frequency as well as direction and type
(Start->Stop->... or Start->Stop->Start->...) adjustable, Sync-Output
Modulation:
frequency and phase modulation, internal or external modulation source, adjustable internal frequency
PLL
Display function with -factor and -offset for the use as a PLL reference
5 storable Presets
USB Interface
(optional, see below) full software control, software inclusive. Data format fully documented
Frequency Accuracy:
50ppm out-of-the-box, menu-based calibration for even greater accuracy
Yellow-green
or
blue
LCD
with backlight
All settings can be stored, start-up frequency and waveform adjustable
A comprehensive printed 64 pages Assembly and Operation Manual is included (in english, german and english manuals in PDF format also available on the enclosed CD).
The manual covers all the techniques needed including soldering.
All SMD parts are pre-assembled, only through-hole components have to be soldered!
The kit contains all necessary parts, the programmed and tested microcontroller, the high quality, E-Tested PCB with gold finish and a 2x16 LCD with backlight. No additional parts or components are required!
Yellow-green or blue backlight is selectable at no additional cost. A machined enclosure is also available (see below).
This kit is also suitable for beginners in electronics.
We provide continuous support before and after you buy.
Please contact us if you have any questions. Also if you need a modification or a device custom built to your needs.
OPTIONS:
USB Interface:
The USB option is available for only . It provides an USB 1.1/2.0 interface that allows reading out the values and full software control. The software is included.
It also allows firmware updates, which will add new features in the future.
Screenshot of the included software.
The plain text data format is fully documented in the included documentation to allow simple integration with external tools and systems.
A matching USB-A-A cable is available here.
Display:
Two displays with backlight are available for
no extra charge
:
yellow-green
(-YG) and
blue
(-BL).
Case Enclosure:
A machined enclosure with all needed cut-outs and labeling is available for .
Size: (WxHxL) 110x60x107mm (4.33"x2.36"x4.21").
Accessories:
15V Mains Adapter (220V Euro plug):
15V Mains Adapter (120V US/Canada plug):
SPECIFICATIONS:
Waveforms:
Sinus, Square, Triangle
Max. Frequency:
Sinus: 0.1 Hz - 10 MHz
Square: 0.1 Hz - 2.5 MHz
Triangle: 0.1 Hz - 2.5 MHz
Adjustment Step:
0.1 Hz over the whole range
Accuracy:
50ppm (calibratable)
Max. Amplitude:
5Vpp
DC Offset:
10V (-5V to +5V)
Output Impedance:
50 Ohm
Modulation:
FSK, PSK
FSK Frequency Swing:
±0.1 Hz - 10 MHz
PSK Phase Swing:
±0.1° - 359.9°
Modulation Source:
intern, extern
Internal Modulation Frequency:
0.1 Hz - 1 kHz
Sweep Range:
0.1 Hz - 10 MHz
Sweep Cycle Frequency:
0.1 Hz - 10 Hz
Display:
2x16 characters dot-matrix LCD with backlight
PLL Factor:
1x - 9999.9x
PLL Offset:
±1 Hz - 1 GHz
PC Interface:
USB 1.1/2.0 (optional)
Supply Voltage:
14-18V DC
Payments:
PayPal
We ship worldwide!
Shipping and handling:
registered with tracking number.
We ship within
24 hours
of receiving cleared payment!
No shipping costs
for additional items.
See the
Ascel-Electronic eBay Shop
for high quality kits and test equipment!
AE20204 High Precision LC Meter
AE20218 Milliohm Meter
AE20401 5.8 GHz Frequency Counter / RF Power Meter