-40%
60MHz Dual-channel DDS Arbitrary Waveform Function Signal Generator Counter Kit
$ 62.14
- Description
- Size Guide
Description
60MHz Dual-channel DDS Arbitrary form Function Signal Generator Counter KitProduct View
Product View
60MHz Dual-channel DDS Arbitrary form Function Signal Generator Counter Kit
Description:
JDS2900 series small portable dual-channel DDS function/arbitrary form generators adopt the DDS direct digital synthesis technology, producing precise, stable, low distortion output signal. It is a function signal generator, as well as a arbitrary form generator, a pulse signal generator, a noise generator, a counter, which can also measure signal and sweep frequency, especially suitable for electronic enthusiasts, scientific research institutions and high-tech enterprises.
Features:
Vertical resolution of form is optimized to 14bit, 266MSa/s sampling rate, more exquisite form.
Sine frequency is optimized to 0.01uHz-60MHZ, is 0.01uHz-15MHz.
Each function has independent operating interface, switch without pause.
Bias adjustment is optimized to -9.99V to +9.99V, more precise.
Two channel phase difference adjustment is optimized to 0.1 degrees; the time delay is more accurate.
2.4-inch high-definition color LCD screen ensures good operation fluency, lots of shortcuts greatly simplifies the operation steps.
It can use standard PC software to control all machine functions and draw arbitrary form, communication protocol publicity makes secondary development very simple.
Large scale integrated circuit and SMT technology, high reliability, long service life.
It has output short circuit protection, all signal output end can work for 60s under the condition of load short circuit.
Specifications:
Model(
Optional
)
JDS2900-15MHz
JDS2900-30MHz
JDS2900-40MHz
JDS2900-50MHz
JDS2900-60MHz
Sine Frequency Range
0~15MHz
0~30MHz
0~40MHz
0~50MHz
0~60MHz
Frequency Range
0~15MHz
0~25MHz
0~25MHz
0~25MHz
0~25MHz
Triangular Frequency Range
Pulse Frequency Range
0~6MHz
0~6MHz
0~6MHz
0~6MHz
0~6MHz
TTL Digital Frequency Range
Arbitrary Frequency Range
Pulse Width Adjusting Range
100nS~4000S
50nS~4000S
40nS~4000S
30nS~4000S
25nS~4000S
Rise Time
≤25ns
≤15ns
≤10ns
≤10ns
≤10ns
Frequency Minimum Resolution
0.01μHz（0.00000001Hz）
Accuracy of Frequency
±20ppm
Frequency Stability
±1ppm/3hours
form
form Types
Sine , , pulse (adjustable duty cycle, pulse width and cycle time), triangle , partial sine , CMOS , DC level (adjust bias to set DC magnitude), half , full , positive step , negative step , noise , index up, index down, sonic , sinc pulse, Lorentz pulse, and 60 kinds of user-defined forms.
Length:
2048 points
form Sampling Rate
266MSa/s
form Vertical Resolution
14
Sine
Harmonic Suppression
≥45dBc(<1MHz);
≥
40dBc(1MHz~20MHz)
Total Harmonic Distortion
<0.8%(20Hz~20kHz,0dBm)
/Pulse
Overshoot
≤5%
Pulse
Duty Ratio Adjustment Range
0.1%~99.9%
Partial Sine
Duty Ratio Adjustment Range
0.1%~99.9%
Sawtooth
Linearity
≥98%(0.01Hz~10kHz)
Output
Sine Amplitude Range
Frequency ≤10MHz
10MHz≤Frequency≤30MHz
30MHz≤Frequency
2mVpp~20Vpp
2mVpp~10Vpp
2mVpp~5Vpp
/Triangle Amplitude Range
Frequency ≤10MHz
10MHz≤Frequency≤25MHz
2mVpp~20Vpp
2mVpp~5Vpp
Amplitude Resolution
1mV
Amplitude Stability
±0.5%/5hours
Amplitude Flatness
±5%(<10MHz); ±10%(>10MHz)
form Output
Output Impedance
50Ω±10% (typical)
Protecting
All signal output can be work under load short circuit conditions within 60
DC Bias
Bias Adjusting Range
Output Amplitude > 2V
0.2V
